Equipment Overview
This system is a mesh belt conveyor type atmosphere type electric furnace. The heating element uses a unit heater that combines a metal heating element and alumina board, contributing to thermal efficiency and energy saving. The heating element uses a metal muffle case to accommodate various gas atmospheres. An air insulation layer is provided between the insulation material and the exterior to keep the exterior wall temperature low, and a full-cover case is used for the exterior to ensure a safe design with all mechanical parts built into the case.
forte
- Continuous firing in various gas atmospheres
- The use of unit heaters provides high thermal efficiency and energy savings.
- The full-coverage exterior design emphasizes safety and aesthetics.
- A wide variety of options are available to build the best specifications for sample firing.
basic structure
| Furnace body section | Heating section, cooling section (heating element + stainless steel muffle case) |
| Driving section | Continuous conveying system with mesh belt conveyor |
| Power supply section | Temperature control, conveying speed control, various alarm devices |
| Gas introduction section |
| Equipment Specifications | |
|---|---|
| Heating section dimensions | W320×H100×L4000mm |
| Cooling section dimensions | W320×H100×L2800mm |
| Temperature conditions | Normal temperature 950°C, maximum temperature 1000°C |
| Heating element | Metal heating element (unit heater) |
| Insulation material | Ceramic fiber board |
| Heating element capacity | 140KW 8-circuit control |
| Conveying method | Continuous conveying by mesh belt |
| Belt material | Mesh belt SUS310S |
| Conveying speed | 30 to 300mm/min Inverter control with speed indicator |
| Drive system | Double-snap method |
| Loading and unloading | Manual |
| Atmosphere | Inert gas, reducing gas, mixed gas |
| Gas flow rate | 10 to 200 L/min Inlet/outlet: nitrogen curtain |
| Electric capacity | AC200V 3φ 145KVA |
| Control method | 8 circuits independent PID control, touch panel operation |
| Mounted instruments | Temperature controller, temperature recorder, thyristor, speedometer |
| Safety devices | Over-temperature protector, wire break alarm, overload alarm, abnormal transfer alarm |
option
- Ultrasonic belt cleaner
- hybrid recorder
- oximeter
- Mass Flow Meter Specifications
- hydrogen densitometer
- Automatic sample loading and unloading device
This electric furnace specification is an example. We will design and manufacture according to your needs.