Equipment Overview
This system is a continuous electric furnace of the mesh belt transfer type. The heater is embedded in a board made of molded alumina fiber, which improves the insulation effect of the furnace itself and reduces the temperature rise time. The improved thermal response also contributes to energy savings.
forte
- Thermal efficiency is high and energy-saving because a heater integrated with insulation is used.
- Heaters are placed on four sides for good temperature distribution
- The full-coverage exterior design emphasizes safety and aesthetics.
basic structure
| Furnace Body Section | 7 Zone, metal muffle case |
| Drive unit | Continuous conveying system with mesh belt conveyor |
| Power supply unit | Temperature control, conveying speed control, various alarm devices |
| Equipment Specifications | |
|---|---|
| Inner dimensions of furnace | W370 x H160 x L2740mm (heating section) + 1150mm (cooling section) (SUS & Inconel metal muffle case) |
| Outer dimensions | W1100×H1700×L5780mm |
| Temperature conditions | Normal temperature 750°C, Maximum temperature 1000°C |
| Heating element | Board-integrated metal heating element 7 Zone 4-side heating |
| Insulation material | Ceramic fiber board, bracket |
| Conveying method | Continuous conveying by mesh belt |
| Belt material | Inconel |
| Conveying speed | 30 to 200 mm/min Inverter control |
| Accessories | Furnace inlet/outlet, gas purge before and after heating pipe |
| Electric capacity | 3φ 200V 60KVA |
| Control method | PID control |
| Installed equipment | Temperature controller, touch panel, over-temperature gauge, flowmeter, cooling water temperature gauge, etc. |
| Safety devices | Over-temperature protector, conveyor overload, conveyor slip, Air pressure drop, cooling water pressure drop, blower overload, supply/unload transfer error |
This electric furnace specification is an example. We will design and manufacture according to your needs.