Equipment Overview
This system is an atmosphere firing furnace, and the gas used is a reduction atmosphere electric furnace using a mixture of hydrogen and nitrogen gases. The heater uses a combination of metal heating elements and ceramic fibers. Side conveyors are provided at the inlet and outlet for automatic insertion and removal.
Features
- Conveyor type reduction furnace for continuous firing of samples
- Thermally efficient design with metal heating elements and ceramic fiber heaters.
- Side conveyors are used at the entrance and exit for automatic insertion and removal.
| Furnace body part | Heating element + Stainless steel muffle case |
| Driving section | Continuous conveying system with mesh belt conveyor |
| Power supply section | Temperature control, conveying speed control, various alarm devices |
| Gas introduction section |
| Equipment specifications | |
|---|---|
| Heating section dimensions | W270×H190×L900mm |
| Outer dimensions | W800×H1400×L5500mm (including side conveyor) |
| Temperature conditions | Normal temperature: 1100°C, Maximum temperature: 1150°C |
| Heating element | Metal heating element + ceramic fiber |
| Insulation material | Ceramic fiber board |
| Conveying method | Continuous conveying by mesh belt |
| Belt material | Mesh belt SUS310S |
| Conveying speed | 100～400mm/min, stepless speed change |
| Atmosphere | Hydrogen + nitrogen (mixed gas) |
| Incidental equipment | Entrance/exit: nitrogen curtain, side conveyor |
| Electric capacity | AC200V 3φ 33KVA |
| Control method | Three independent PID control circuits |
| Mounted instruments | Program controller, output adjuster, temperature recorder, speedometer |
| Safety devices | Over-temperature protector, wire break alarm, overload alarm, abnormal transfer alarm |
This electric furnace specification is an example. We will design and manufacture according to your needs.