Equipment Overview
This equipment automatically peels off the film attached to the supplied small panels. The purpose is to reuse panels that were deemed defective due to contamination of air bubbles, dust, etc. during film application.
The system is equipped with a clamping mechanism in the shape of a scraper. The system clamps and peels off the film attached to the small panel by linear movement of the suction table and the clamping mechanism.
forte
- Just place the panel, peeling is automatic.
- A fully automated system with loader and unloader is possible.
| Basic Specifications | |
| Model | LPR-0204-D004 |
| Panel size | 2 inches to 4 inches approx. |
| Peeling tact time | Approx. 10sec/2-inch panel (from panel set to end of peeling) |
| Machine dimensions | W880 x H1200 x D840mm |
| Power requirements | AC100V 1φ20A (200V specification also available) |
| Required compressed air | 0.6MPa or more 10L/min |
| Vacuum pressure | 80KPa G or more 100NL |
| Option | Loader, unloader, available (equipment can be in-line) |