Equipment Overview
This furnace is a bottom lifting type electric furnace of the Super Burn S6/S7 series, which has been highly evaluated and trusted.
It can be used for a wide range of heat treatment applications in research and production.
feature
This is an easy-to-use, long-life electric furnace with good temperature characteristics that inherits the performance of Super Burn.
The control panel is designed from the user’s point of view for ease of operation and visibility.
- Furnace bottom lifting type for easy sample removal.
- Excellent workability (safety) under high temperatures
- Space-saving type (control panel is even smaller than the conventional product)
- Fully equipped with safety measures
- Safety design of thermocouples for independent overspeed, double-winding transformers, furnace cooling, etc.
- Energy-saving design (approx. 20% reduction in power consumption compared to our conventional products)
- High-quality ceramic fiberboard insulation is used, which is thermally efficient and very economical.
- Temperature distribution accuracy approx. ±5°C (effective dimension, no sample, when stable)
- Easy-to-operate touch panel
- Program patterns of 20 patterns/13 steps can be created and stored on the touch panel.
- The data collected by the monitor can be saved to USB memory in CSV file format.
- Various options (listed below) expand the range of applications
option
- Gas introduction hole
φ8mm / Hose port / Lower rear side ＜Introduction of atmospheric gas, etc. - Gas exhaust hole
φ20mm / center of ceiling ＜Exhaust of gas components from inside of furnace - Furnace internal temperature measurement hole
Flange for φ6mm thermocouple mounted on top surface ＜For monitoring temperature inside furnace - Electric elevating mechanism ＜Laborsaving
- Shutter ＜Manual shutter at furnace mouth, effective for sample removal at high temperature
- Insulation cover .
- Stirring mechanism ＜Speed control possible Molten sample stirring in crucible inside the furnace＞.
- Power-saving shutdown function <When the furnace temperature reaches a safe temperature, all power is turned off to save energy.
- Power failure countermeasure function ＜Can be set to continue or stop operation in the event of a momentary or short time power failure
- Non-standard recorder ＜Input values are recorded both analog and digital by hybrid recorder
- Communication interface <RS-232C compliant System management can be performed by connecting to a high-level network. ＞Communication interface
- Door alarm ＜If a door is opened during operation, the door alarm is activated, the program in operation is reset, and energization to the heater is stopped. ＞
- Emergency stop button > (The program in operation will be reset.)
- Alarm buzzer installed (blows when an alarm occurs to notify the surrounding area of an abnormality)
- Automatic gas introduction mechanism <enables automatic control of ambient gas, cooling gas, etc.
| Electric Furnace OutlineSpecifications | ||||
| Model | S6V-1515D | S7V-1515D | ||
| Inner dimensions of furnace | W200×H200×D250mm | |||
| Furnace bottom dimensions | W150×H150×D150mm | |||
| Primary power source and capacity | AC200V 1φ 9kVA | |||
| Heater capacity | 6kW | |||
| Normal operating temperature | 1600°C | 1700°C | ||
| Maximum temperature | 1600℃ 1700 | 1700℃ 1700℃ 1700℃ 1700 | ||
| Temperature rise time/temperature | Approx. 60 min/1600°C | Approx. 60 min/1700°C | ||
| Temperature distribution | ±5℃ No sample stability within the effective dimension | |||
| Heating element | Molybdenum disilicide (M0Si2) | |||
| Furnace body dimensions/weight | W540×H1275×D670mm / 160kg (Protrusions are not included.) | |||
| Control panel dimensions/weight | W300×H702×D670mm (including casters H77mm)/120kg | |||