Equipment Overview
This equipment is a small furnace that can be operated continuously at 1000°C. A metal case (muffle case) is attached to the furnace, and inert gas is introduced to carbonize and sinter wood and other materials in a non-oxidized state. Moisture, products, dry distillate, etc. generated during the process are collected in a tank set at the bottom of the furnace. This is a high-performance experimental carbonizing furnace that can be used for many types of wood.
Equipment Features
- Non-oxidizing sintering can be done by a simple operation.
- Energy-saving design with excellent thermal efficiency.
- Space-saving design with integrated furnace body, control unit, and tank.
option
- Temperature Recorder
Various types (analog, digital, hybrid) are available for recording heat treatment - Independent Over-temperature Protection Device
Safety is further enhanced by duplexing the detector end for overheat prevention and the alarm meter. - Explosion Vent
- deodorizer
| Specifications | ||||
| Dimensions inside muffle W x H x D mm |
125 x 125 x 270 | 200×200×320 | 200×200×470 | |
| Primary power supply | AC200V single phase 50/60Hz | |||
| Heater capacity | 3.5kW | 6kW | ||
| Max. normal temperature | 1000°C | |||
| Atmosphere | Inert gas atmosphere | |||
| Muffle case material | SUS310S | |||
| Heating element | Metal heating element | |||
| Control method | PID continuous control | |||
| Program function | 8 steps, 8 patterns | |||