Equipment Overview
This device solves the drawbacks of the conventional ball lifting method, such as troublesome balance operation and individual differences in measurement results. Using an electronic balance (load cell load cell), the balance body is raised and lowered at a constant speed, and viscosity is determined by measuring the viscous resistance applied to the suspended sphere.
forte
- Digital processing of the measured amount is possible because resistance (load) is measured by a load cell.
- A wider range of viscosity can be measured than with conventional viscometers.
- Automatic measurement is possible.
option
- Platinum sphere and crucible for measurement (Accessories: platinum wire, extension wire)
- Automatic measurement and data processing system (PC hardware and software)
Specifications and Equipment Configuration
| Specifications | |
| Viscosity Measurement Range | 104 to 1Poise |
| Dimensions of measuring section | W260×D200×H340mm |
| Viscosity Balance | Maximum load 100g |
| Measuring section dimensions | W530×D450×H450mm |
| Transducer output | 0 to 10V |
| Digital display | 0 to 19.999g |
| Reading accuracy | 10mg |
| Temperature readout | 0 to 1600°C BCD output |
These specifications are subject to change for improvement.
Please feel free to contact us for more information about our glass testers!