Equipment Overview
This device was developed based on the concept of “easy microwave heating” by focusing on the 2.45 GHz frequency band.
The lineup includes a standard 1.5kW model and a powerful 3.0kW model, which can be easily program-controlled.
Scalability (including optional support)
■Gas introduction
Gas flow is possible by installing a gas inlet port.
*Only gas flow is possible because the container is not sealed.
■Multifunctional port
A port on the ceiling allows access to the inside of the tank for stirring, temperature measurement, etc.
Microwave leakage countermeasures due to the antenna effect must be taken .
■Higher output (Model: AMU-3.0UL)
Two 1.5 kW oscillators are installed.
■High temperature support (optional)
High-temperature specifications allow for temperatures up to 1200°C.
Dimensions inside the insulation box: W220 x H140 x D230 mm
*Heatable temperature depends on the material and size of the sample.
■Magnetic stirrer (optional)
Microwaves can be applied to liquid samples while stirring.
| Model | AMU-1.5ST | AMU-1.5MAX | AMU-3.0UL |
| Frequency | 2.45GHz | ||
| Output | 1.5kW | 3.0kW (1.5kW x 2) | |
| Microwave Source | Magnetron x 1 unit | Magnetron x 2 units | |
| Exterior dimensions | (Approx.) W620 x H650 x D670mm | ||
| Chamber interior dimensions | (Approx.) W390 x H240 x D450mm | ||
| Mode | Multimode | ||
| Atmosphere | Normal atmosphere | ||
| Temperature Measurement | Sensor thermocouple | Radiation thermometer | |
| Operating temperature range | 10~250°C | ||
| MAX1200℃(Option) *Depends on the sample | |||
| Power supply | AC200V 50/60Hz 4kVA | AC200V 50/60Hz 6kVA | |
| Observation window | W340×H190mm | ||
Demo measurement is available at our test center! (AMU-1.5ST only)