Equipment Overview
This device is used to manually peel off the film of panels supplied by the operator during panel repair work.
This enables reuse of panels that were determined to be NG due to air bubbles, dust, or other contaminants at the time of film application.
forte
- Easy operation increases work rate.
- The film is wrapped around a shaft and the entire shaft is clamped, eliminating the need for release tape or other means.
- The film is pulled horizontally with the panel, minimizing damage to the panel.
- Capable of supporting thin-film panels.
- Easy to remove the film after peeling.
| Basic Specifications | |
| Panel size | 24 inches (We will manufacture according to the desired size.) |
| Equipment dimensions | W920 x H550 x D1800mm |
| Weight | 70kg |
| Options | Motor for peeling drive, vacuum pump, static eliminator |
| Utilities | |
| Vacuum source | For panel adsorption -80kPa or more at gauge pressure |
| Compressed air required | 10L/min |